Mathews Compound Bows

Mathews Compound Bows feature the latest in design innovations and the highest quality components. They team up to creat a bow that is fast, smooth, quiet and accurate.

Mathews Bow Tuning

Tiller

Setting the till on your Mathews SoloCam bow is easy. In fast, there's no measuring necessary. Starting from a point where both limbs are tightened completely, simply back them off an equal number of turns.

Estimating Center Shot

Using the correct arrow size, position your arrow on the string at the nock point. While holding the bow in front of you, visually align the bow string with the center line of the grip. the string should run true down the center of your arrow shaft. this is a good reference point to begin paper tuning.

The Importance of Paper Tuning and Tear Patterns

With an improperly tuned bow, broadheads may shoot as much as 18" off center at 20 yards (when compared to field tips). By tuning a bow to shoot a good hole in paper, you will ensure the best possible broadhead flight

Before beginning, it's important to know that perfect "bullet holes" are not always possible with ail shooters. Light tears are quite acceptable and wiII not deter accuracy. Fine tuning requires patience and consistent shooting form. Perfect results are only achieved with perfect form. Also, remember to always do your final sightings with broadheads before hunting.

To begin paper tuning, stand approximately eight feet from the paper (with a suitable backstop several feet behind the paper to allow complete arrow passage). Check your tear pattern against the following boxes for further instruction. If it's a combination, such as up and to the left, both instructions will apply.